Difference between revisions of "Audioplayer DMXC2"

From English DMXC-Wiki
Jump to navigation Jump to search
Line 105: Line 105:
 
*If you turn the hooklets off with the cue names, the corresponding cue is deactivated, however, remains in the Trackdefinition. One can use this in the construction phase to test the interaction of single effects until one has found the right combination.
 
*If you turn the hooklets off with the cue names, the corresponding cue is deactivated, however, remains in the Trackdefinition. One can use this in the construction phase to test the interaction of single effects until one has found the right combination.
  
==Modulbezogene Befehle==
+
==Module commands==
  
* Modul: '''Audiotrack'''
+
* Modul: '''Audio player'''
  
* Bedeutung von ''Gerät/Funktion'' und ''Kanal''
+
* Meaning from ''device/function'' and ''channel''
 
{| class="wikitable centered"
 
{| class="wikitable centered"
 
|- style="vertical-align:top;"
 
|- style="vertical-align:top;"
!style="width: 105px"| Gerät/Funktion
+
!style="width: 105px"| Device/Function
!style="width: 195px"| Beschreibung
+
!style="width: 195px"| Description
!style="width: 105px"| Kanal
+
!style="width: 105px"| Channel
!style="width: 195px"| Beschreibung
+
!style="width: 195px"| Description
 
|- style="vertical-align:top;"
 
|- style="vertical-align:top;"
 
|rowspan="4"| Ausgewählte
 
|rowspan="4"| Ausgewählte
Line 140: Line 140:
 
|}
 
|}
  
Bedeutung der ''Flags'':
+
Meaning of the ''Flags'':
 
{| class="wikitable centered"
 
{| class="wikitable centered"
 
|- style="vertical-align:top;"
 
|- style="vertical-align:top;"
 
! style="width: 35px"|  Flag
 
! style="width: 35px"|  Flag
! style="width: 105px"| Bedeutung
+
! style="width: 105px"| Meaning
! style="width: 460px"| Beschreibung
+
! style="width: 460px"| Description
 
|- style="vertical-align:top;"
 
|- style="vertical-align:top;"
 
| style="width: 35px; text-align:center"| T
 
| style="width: 35px; text-align:center"| T
| style="width: 105px"| Umschalt-Modus
+
| style="width: 105px"| Toggle mode
| style="width: 460px"| Das Flag « ''Umschalt-Modus'' » bewirkt, dass die Funktion beim ersten Aufruf ausgeführt wird und beim zweiten Aufruf zurückgesetzt wird.
+
| style="width: 460px"| The Flag »''Toggle mode''« result in the function's being set by the first call and being reset by the second call.
|- style="vertical-align:top;"
+
|- style="vertical-align:top;"  
 
| style="width: 35px; text-align:center"| O
 
| style="width: 35px; text-align:center"| O
| style="width: 105px"| Angegebenen Wert verwenden
+
| style="width: 105px"| Used specified value
| style="width: 460px"| Das Flag « ''Angegebenen Wert verwenden'' » bewirkt, dass der Wert in der Spalte Wert dem entsprechenden Kanal zugeordnet wird. Dieser Wert ist kein DMX-Wert 0 bis 255, sondern ein Prozentwert 0,000 bis 100,000%  
+
| style="width: 460px"| The Flag »''Used specified value''« result in the being assigned to the appropriate channel of the value in the openings' value. This value isn't DMX value 0 to 255 but a per cent value 0. 000 to 100. 000%  
 
|- style="vertical-align:top;"
 
|- style="vertical-align:top;"
 
| style="width: 35px; text-align:center"| A
 
| style="width: 35px; text-align:center"| A
| style="width: 105px"| Wert Abfragen
+
| style="width: 105px"| Ask for value
| style="width: 460px"| Das Flag « ''Wert Abfragen'' » bewirkt, dass sich bei Aufruf des Befehls ein Eingabefenster öffnet, in dem der Prozentwert eingegeben werden kann.
+
| style="width: 460px"| The Flag »''Ask for value''« result in the opening at call of the order of an input window in which the per cent value can be entered.
 
|- style="vertical-align:top;"
 
|- style="vertical-align:top;"
 
| style="width: 35px; text-align:center"| I
 
| style="width: 35px; text-align:center"| I
| style="width: 105px"| Wert 0 ignorieren
+
| style="width: 105px"| Ignore value 0
| style="width: 460px"| Das Flag « ''Wert 0 ignorieren'' » bewirkt, dass ein Wert von Null ignoriert wird. Wird bei einigen Befehlen benötigt, um eine korrekte Funktion zu gewährleisten.
+
| style="width: 460px"| The Flag »''Ignore value 0''« result in the being ignored of a value of zero. Do you need at some orders to ensure a correct function.
 
|}
 
|}
  
====Synchronisation des Audioplayers mit Winamp====   
+
==Tip(s)==
 +
 
 +
====Synchronization of the audio player with Winamp====   
  
Der Audioplayer kann auch mit einer Playlist des Wimamp-Players synchronisiert werden:
+
The audio player can be synchronized also with a play cunning of the Wimamp player:
  
 
*Der « DMXControl »-Button stellt den normalen Audioplayer-Mode ein.   
 
*Der « DMXControl »-Button stellt den normalen Audioplayer-Mode ein.   

Revision as of 10:21, 31 October 2013

Template:Chaptertitle DMXC

VLC icon.png This section is actively undergoing a major edit for a while. To help avoid edit conflicts, please do not edit this section while this message is displayed or contact the editor (Steiny) of this page.


Hint:
25.5.2013: UPrenner: create the article page
30.10.2013 UPrenner: work-in-progress


Arrow back.png Command box
Timecode player Arrow forw.png
Contents

 

Overview

With the audio player audio tracks can be accompanied by cues, chasers and commands. The audio player in principle only offers another surface that for a cue list, like the script and the time code player the possibility is here establishing the cues for the course of the song point exactly. Through this individual Lightshows can be made for some songs.

Description

The two audio traces are, the stereo traces of a music track present which a striking feature of the audio player (left channel: green, right channel: red). In this the temporal course with the corresponding amplitudes of the song and the sedate cues are shown to window area. At inefficient computers it recommends himself not to load the waveform graphic with the checking box to suppress the indication of the amplitude course, through what CPU performance is saved.


Picture 1: The Audio player
Picture 1: The Audio player

<br\>

  Important hint The audio player serves the crown transparency of wave files. If it is merely about playing wave files, the audio cue has to be preferred. Several also can play audio channels (up to 16 pieces) parallel there.


Controls

Icon Bezeichnung Beschreibung
DMXC2 Manual audio player button DMXControl.png DMXControl With the button DMXControl in the audio player you adjust, that the sound file and the audio cue list are started and played about DMXControl.
DMXC2 Manual audio player button WinAmp.png WinAmp With the button WinAmp in the audio player you adjust, that the sound file and the audio cue list are started and played about the external program WinAmp. (Synchronization with WinAmp)
DMXC2 Manual audio player button play.png Play The play button starts the sound file and the audio cue list if the DMXControl button is operated.
DMXC2 Manual audio player button rewind.png Rewind With this button the audio cursor is placed again on the beginning of the song. (This works also when playing the sound file)
DMXC2 Manual audio player button repeat.png Repeat If this button is operated, then the sound file is played from the front after ending again.
DMXC2 Manual audio player button prefade listening.png Prefade listening With the pre-hearing button the sound file becomes audio cursor position wornly as of the current one. At a renewed click on the button the player stops and the audio cursor returns into his starting point.
DMXC2 Manual audio player button zoom.png Zoom With the zoom lens drop down the audio trace can be extended.
File:DMXC2 Manual audio player button do not load waveform.png Do not load waveform If the checking box is highlighted, the audio trace graphic isn't loaded. Through this the performance can be increased at slow computers.
DMXC2 Manual audio player button clock.png Clock With the clock badge the straight highlighted cue is moved on the current audio cursor position in the audio cue list.

The remaining buttons are standard buttons.

Audio track

  • A yellow vertical line in the audio trace represents the current position marking of the audio cursor.
  • A white vertical line in the audio trace shows the cue marking with positions already assigned.
  • Line blue more vertically is shown on the audio trace this one if the audio cursor stands on an assigned cue marking.

If one is with the mouse cursor on a cue marking, the mouse pointer converts himself to a double arrow. In addition, a tool tip is shown to the cue with the name. The cue marking can be placed by clicking and hold tight this one con mouse button.


 Important Hint The mouse pointer is on the audio trace and not on a cue marking, a tool tip which contains merely a hyphen is then shown. This tool tip is without broader meaning.


Manage audio project

  • Button « Add »: By this button a new lets himself make Audiotrack project.
  • Button « Open »: With this Button one assigns an audio file to the audio track project. Possible audio files must be for mp3, mp2, mp1, wav or ogg of the type.
  • Button « Manage »: The menu items hide: behind this Button « Add », « Copy », « Rename », « Delete » and « Manage ». The audio lists can be also managed with them.


  Important hint There are problems with a certain skew at wave files with a variable bit rate (VBR).

It is therefore the best to use wave files with a constant bit rate (e. g. 128 Kbit or 320 Kbit).


Serve

At the click with the mouse button into the audio window the audio cursor (yellow line) appears in this place. E.g. the lets himself in with that « Play » mode (click of the play button) jumps to an arbitrary place to hear these. A double click into the audio window starts this one « Play »-mode in the appropriate place. A renewed double click stops this one « Play »-mode.

New cues can be assigned as follows:

  • Hear the title and think highly of you in the graphic on prominent places in the song where you want to place cues, effects or commands. This action is exactly like in other DMXControl tools made by clicking the button « Add ».
  • Particularly quick users even create this in the « Play »-mode. Usually one, however, stops the title and places the cursor exactly in the desired place. There are two possibilities, there got quite exactly therefore:
    • One extends the audio player window or about the breadth of the complete screen
    • one can adjust a zoom lens factor for the graphic representation of the amplitudes.
  • Make a new cue, choose one from the cue library or you define an order.
  • You can change the position of an cue in the audio track by the way by moving the assigned blue joist with the mouse (double arrow cursor). The new position is updated in the instruction list. By a click on the table head « Position » are the cues sorted climbing or getting off.
  • The fade in time can be adapted the dull by selecting the appropriate cell in the table.
  • If you turn the hooklets off with the cue names, the corresponding cue is deactivated, however, remains in the Trackdefinition. One can use this in the construction phase to test the interaction of single effects until one has found the right combination.

Module commands

  • Modul: Audio player
  • Meaning from device/function and channel
Device/Function Description Channel Description
Ausgewählte Der weitere Befehl wird auf den aktuell ausgewählten Audiotrack angewendet.
(Der Befehl Auswählen macht bei dieser Funktion keinen Sinn)
Start/Stopp Der Befehl Start/Stopp startet und stoppt den ausgewählten Audiotrack zur Wiedergabe. (Der Befehl sollte im Zusammenhang mit dem T-Flag eingesetzt werden.)
Start Der Befehl Start startet den ausgewählten Audiotrack zur Wiedergabe.
Stopp Der Befehl Stopp stoppt den ausgewählten Audiotrack zur Wiedergabe.
zurück Spulen Durch den Befehl zurück spulen Springt der Audio-Cursor wieder an den Anfang des Soundfiles.
Nächste
Vorherige
Sonstige Einträge
Der weitere Befehl wird auf den nächsten, vorherigen oder im Dropdown benannten Audiotrack angewendet. Auswählen Wählt den nächsten, vorherigen bzw. den im Dropdown Gerät/Funktion benannten Audiotrack aus.
Start/Stopp
Start
Stopp
zurück spulen
siehe oben

Meaning of the Flags:

Flag Meaning Description
T Toggle mode The Flag »Toggle mode« result in the function's being set by the first call and being reset by the second call.
O Used specified value The Flag »Used specified value« result in the being assigned to the appropriate channel of the value in the openings' value. This value isn't DMX value 0 to 255 but a per cent value 0. 000 to 100. 000%
A Ask for value The Flag »Ask for value« result in the opening at call of the order of an input window in which the per cent value can be entered.
I Ignore value 0 The Flag »Ignore value 0« result in the being ignored of a value of zero. Do you need at some orders to ensure a correct function.

Tip(s)

Synchronization of the audio player with Winamp

The audio player can be synchronized also with a play cunning of the Wimamp player:

  • Der « DMXControl »-Button stellt den normalen Audioplayer-Mode ein.
  • Der Audioplayer kann sich mit der Playliste des Winamp-Players synchronisieren, wenn Sie den Winamp-Button aktivieren. In diesem Fall sucht der Audioplayer, ob der gerade in der Playlist gespielte Song auch ein Audioplayer-Track ist und startet dann die entsprechenden Szenen und Effekte. Die Musiksteuerung (z.B. auch das Springen zu bestimmten Stellen) obliegt dann Winamp.

Der Vorteil dieses Betriebskonzeptes liegt darin, dass man dann natürlich synchrone Beats vom Beattrigger erhält, die musikgesteuerte Effekte triggern können. Dazu muss das Winamp AVS-Plugin installiert sein. Die Trackliste und die Winamp-Playlist synchronisieren sich über den in Winamp angezeigten Titel, meist dem mp3-ID3-tag des Songs. Diesen kann man z.B. in Winamp im Menü File->View file.info ... einsehen und auch verändern (siehe folgendes Bild). Natürlich geht das auch mit anderen mp3-Editoren. Der angezeigte Titel ist in Winamp bei Einstellungen /Titel/Erweiterte Titelformatierung veränderbar.


Picture 2: Trackinformationen in Winamp
Picture 2: Trackinformationen in Winamp


Um diesen Modus zu starten, muss der Winamp-Button aktiviert sein (siehe Punkt 1 im folgenden Bild). Ganz wichtig ist, dass der Trackname mit dem angezeigten Titel des Songs übereinstimmt (siehe Punkt2 im Bild). Ob die Synchronisation erfolgreich ist, erkennt man daran, ob im Feld Audiodatei (wo der Songdateiname angegeben ist) ein (X) für erfolgreich oder ein (-) für nicht gefunden erscheint (siehe Punkt 3 im Bild).


Picture 3: Synchronisisation des Audioplayers mit Winamp
Picture 3: Synchronisisation des Audioplayers mit Winamp

 

Arrow back.png Command box
Timecode player Arrow forw.png
Contents