Procedures examples (DDF-Syntax) DMXC3

	Procedures examples (DDF-Syntax) DMXC3	Article describes DMXControl 3.1.2

Part 1: Basics
General introduction	Basic structure	Basic rules

Part 2: Functions
Intensity Position Color Matrix	Radix Gobo Lens Blade Shifter	Effect wheel Stage effects Free Functions

Part 3: Procedures
Functions	Examples

Part 4: Examples
LED Spotlight	4-Light Bar	Moving Head

The following table shows some examples of predefined as well as custom procedures.

Tag	Variant	Code
`reset`	Complete device reset	<reset> <set dmxchannel="0" value="255" /> <hold value="6000" /> <restore dmxchannel="0" /> </reset> Reset Set DMX channel 1 to DMX value 255. Hold the DMX value for 6000 ms (6 s). Restore the original DMX value for DMX channel 1.
`lamp_on`	Turn on lamp	<lamp_on> <set dmxchannel="0" value="255" /> <hold value="4000" /> <restore dmxchannel="0" /> </lamp_on> Turn on lamp Set DMX channel 1 to DMX value 255. Hold the DMX value for 4000 ms (4 s). Restore the original DMX value for DMX channel 1.
`lamp_off`	Turn off lamp	<lamp_off> <set dmxchannel="0" value="50" /> <hold value="8000" /> <restore dmxchannel="0" /> </lamp_off> Turn off lamp Set DMX channel 1 to DMX value 50. Hold the DMX value for 8000 ms (8 s). Restore the original DMX value for DMX channel 1.
`procedure`	Eco-mode for lamp	<procedure name="Lamp eco mode"> <set dmxchannel="0" value="170" /> <hold value="4500" /> <restore dmxchannel="0" /> </procedure> Custom procedure named "Eco-mode for lamp" Set DMX channel 1 to DMX value 170. Hold the DMX value for 4500 ms (4.5 s). Restore the original DMX value for DMX channel 1.