Difference between revisions of "Lesson 13 Tut3"

From English DMXC-Wiki
Jump to navigation Jump to search
m
 
(25 intermediate revisions by 8 users not shown)
Line 1: Line 1:
−
<h2 style="{{Style:Hauptseite:Überschrift}}" align="center">DMXControl 3 lessons</h2>
+
{{Maintitle
−
<div style="{{Style:Hauptseite:Box}} background-color:#ffffff">
+
| logo = Im-aim.png
−
<!-- Rechte Spalte -->
+
| maintitle = First Steps: {{PAGENAME}}
−
<div class="floatright" style="width: 78%;  margin-top:-8px;">
+
}}
−
 
+
{{NavigationTop-Tut3
−
 
+
| LinkBackwards = Lesson_12_Tut3
−
 
+
| TextBackwards = Lesson 12
 +
| LinkForwards = Lesson_14_Tut3
 +
| TextForwards = Lesson 14
 +
}}
 
==Overview==
 
==Overview==
 
In this lesson we explain how to apply presets. By re-using presets you are more efficiently when programming your show.
 
In this lesson we explain how to apply presets. By re-using presets you are more efficiently when programming your show.
  
 
==Lecture 13: Presets ==
 
==Lecture 13: Presets ==
−
 
+
Presets are very similar to cues. You can create them in the same way (see Lesson 8). Similar to the button "Create cue," here you find the button "Create preset". You can use presets to store different values for the parameters of your fixtures. You can store:
−
Presets are very similar to cues. You can create them in the same way, see lesson 8. Similar the the button "Create cue" here you find the button "Create preset". You can use presets to store different values for the parameters of your fixtures. You can store:
 
  
 
* moving light positions
 
* moving light positions
Line 20: Line 22:
 
* etc.
 
* etc.
  
−
The big advantage of using presets is, that it's referenced data. That means, whenever you record a cue using presets, not the actual values, but a link to the preset is stored. So keep in mind, if you change your preset, all cues that use this preset will use the new values. A simple example where presets can rapidly speed up programming would be:
+
The big advantage of using presets is, that it's referenced data. That means whenever you record a cue using presets, a link to the preset is stored, and not the actual values. So keep in mind, that if you change your preset, all cues that use this preset will use the new values. A simple example where presets can rapidly speed up programming would be: You've recorded a color of your cyclorama wash as a preset and used this preset in five cues. If you later decide to modify the cyclorama wash a bit, you just need to update one preset, instead of five cues. However, if you just want to change the color in one cue you can do that by overwriting the reference with manual data.
−
You've recorded a color of your cyc wash as a preset and used this preset in five cues. If you later decide to modify the cyc wash a bit, you just need to update one preset instead of five cues. However if you just want to change the color in one cue you can do that by overwriting the reference with manual data. (i hope!)
+
{{Picture_with_subtitle|DMXC3L13 Preset.jpg|1|Presets|center}}
−
 
 
−
[[Datei:DMXC3L13 Preset.jpg]]
 
  
 
===Recording Presets===
 
===Recording Presets===
−
 
+
To  record a preset (i.e. record entries in programmer or parts of it) use the  "Store Preset" Button in the preset window. The programmer filter will  show. This gives you the ability to choose what to record. See Lesson 8 to learn how to use the programmer filter. After you  press OK in the programmer filter, a new preset will be recorded. You can now use F2 (or click into name field) to rename it.
−
 
 
  
 
===Modifying Presets===
 
===Modifying Presets===
 +
If  you want to modify an existing preset, select the preset you want to  modify and click on the arrow to the right of the "Add Preset" button. A menu will pop up, where you can choose how to modify the preset.
  
 +
====Replace====
 +
Replace will remove all existing entries from the preset and save everything that is in the programmer to the preset.
  
 +
====Merge====
 +
Entries  that are not in the programmer but in the preset, are not touched.  Existing entries will be updated and missing ones will be added
  
−
===Deleteing Presets===
+
====Append====
 +
Entries  that are in the programmer, but not in the preset, will be appended to the preset. Entries that are in the programmer, and in the preset, will  stay untouched in the preset.
  
 +
====Subtract====
 +
Entries that are in the programmer, and also exist in the preset, will be removed from the preset. However keep in mind, the new value is not subtracted from the old, but rather, the whole property will be removed from the preset.
  
−
 
+
===Deleting Presets===
−
/*After you have created your presets you can use it in two (TODO: should be more than two scenarios) scenarios: using the complete preset or using of parts of a preset*/
+
Select the preset you want to delete, then press Delete or use the context menu, -> Delete Preset.
  
 
===Applying Presets===
 
===Applying Presets===
−
 
+
You can "drag&drop" a preset into your cue list. A new cue is created. You can set timing and triggers for this cue. The name will start with  "--> ". However, you can rename it to what you want. The complete preset will be played back when you use this cue.
−
You can "drag&drop" a preset into your scene list. A copy of your "preset cue" will be inserted. All values from the preset are taken over into the new cue.
 
−
 
 
  
 
===Applying Presets for Selected Fixtures Only===
 
===Applying Presets for Selected Fixtures Only===
 +
Select the fixtures you want to apply your preset to. Then double-click on the preset you want to use. The entry will show up in the Programmer window. Keep in mind, if you store this to a cue, it is not the actual values that are stored, but a reference to this preset. So if you change something in your preset, the changed values will be used everywhere that you used this preset.
  
−
TODO: uhm should work, ha?
+
===Applying Selected Properties of Presets===
−
 
+
It is also possible to use only a selected property from the preset, and ''not'' the whole preset. Select all fixtures and drag&drop the preset to the property you want use in property grid. The values for the property will show up in the programmer
−
 
 
−
===Applying Selected Parameters of Presets===
 
−
 
 
−
It is also possible to take ''not'' the whole preset, but only a selected attribute from the preset for your current cue. For this case you drag&drop the preset to your dedicated attribute, e.g. the dimmer. Please have a view to the programmer: You can see that in our case the dimmer value was taken from the preset.
 
−
 
 
  
 
===Applying Selected Parameters of Presets for Selected Fixtures Only===
 
===Applying Selected Parameters of Presets for Selected Fixtures Only===
 +
You  can also apply only a selected property of your preset to selected fixtures only. First select your fixtures, then drag&drop the preset  to the properties you want to use in the property grid. The value for the selected property of the selected fixtures will show up in the programmer window
  
−
TODO: i guess this should work, too.
+
===Applying a Preset for Fixtures that are Not in the Preset===
−
 
+
Also  you can use a Preset to set a property of a fixture that has no value stored in the preset to a value from the preset. First a short example: A preset with some RGB Par-cans are set to a color. Later you want your moving lights change to the same color as your RGB Par-cans. You might do this by remembering, or looking up this color. But, there is a third possibility. Select your fixtures, in this example you moving lights, and move your preset (drag&drop) to the property grid. Now hold "Ctrl" key down and drop your preset to the color property of your fixture. The color of your fixture will be set to the last found value of the used property in your preset. I.e., the filtering of devices is switched off by the "Ctrl" key.
−
 
 
−
/*'''Attention''' Presets resp. values from presets are taken as references to original preset. If you modidy afterwards the preset, all reference values are changed automatically. This behaviour can be  beneficially applied when adapting a show by only modifying few presets.*/
 
−
 
 
−
 
 
−
'''topics to be added (by beta testers)'''
 
−
*yah first release the beta, than we'll see what to add here...
 
−
 
 
−
*TODO: some paragraphs sound odd, going to change that later ...
 
−
*TODO: check terms that dmxc uses, here is what i normaly use:
 
−
** - intensity of fixture or just intensity instead of dimmer value
 
−
** - parameters are pan/tilt, color, intensity
 
−
** - pan/tilt: focus?
 
−
** - attributes: follow, wait, trigger in cue list...
 
−
** -
 
−
*TODO: remove attention notice. That should be clear to the reader till there.
 
−
*TODO: add some better explanation what presets are.
 
−
*TODO: capitalization of paragraph heading?
 
−
 
 
−
==Excercise==
 
−
* Create some presets and use it in your scene list
 
−
*
 
−
 
 
−
==Additional links and references==
 
−
*
 
−
 
 
−
 
 
−
==Certificate==
 
−
I have understood the topics of this lecture and want to continue with next course:
 
−
[http://www.dmxcontrol.de/mediawiki_beta/index.php?title=Einsteiger:Lesson11/en Lecture14: XXXX]
 
−
 
 
−
 
 
−
</div>
 
  
−
<!-- Linke Spalte -->
+
===Shortcuts===
−
<div style="{{Style:Hauptseite:Box}} width: 17%; background-color:#f5faff">
+
Of  course there are shortcuts that help to increase save time working with  presets. But if you use shortcuts, the programmer filter will not be used.
−
{{DMXC3_lesson/en}}
+
−
</div>
+
===Tips===
 +
Tip 1: By activating the "highlight" button the selected preset is shown in the live view.
  
 +
Tip 2: By applying fanning in a preset you can use it for smaller or larger device groups with amazing effects.
  
 +
==Exercises==
 +
1) Create a preset "yellow" and use it per drag&drop in Stage View
 +
<br>
 +
2) Use some presets in your cue list
  
−
__NOTOC__
+
{{NavigationTop-Tut3
−
{{Languages|Einsteiger:lesson13}}
+
| LinkBackwards = Lesson_12_Tut3
 +
| TextBackwards = Lesson 12
 +
| LinkForwards = Lesson_14_Tut3
 +
| TextForwards = Lesson 14
 +
}}
 +
[[de:Lektion_13_Tut3]]
 +
[[Category: Tutorials DMXControl 3]]

Latest revision as of 23:45, 15 May 2013

[[File:{{{Logo}}}|48px|link=]] {{{Pagetitle}}}
Arrow back.png Lesson 12
Lesson 14 Arrow forw.png
table of content

Overview

In this lesson we explain how to apply presets. By re-using presets you are more efficiently when programming your show.

Lecture 13: Presets

Presets are very similar to cues. You can create them in the same way (see Lesson 8). Similar to the button "Create cue," here you find the button "Create preset". You can use presets to store different values for the parameters of your fixtures. You can store:

  • moving light positions
  • colors of RGB Pars
  • combination of gobo, shutter on and color
  • generic chasers (where you later only replace/modify the color)
  • or simply intensities of your conventional fixtures
  • etc.

The big advantage of using presets is, that it's referenced data. That means whenever you record a cue using presets, a link to the preset is stored, and not the actual values. So keep in mind, that if you change your preset, all cues that use this preset will use the new values. A simple example where presets can rapidly speed up programming would be: You've recorded a color of your cyclorama wash as a preset and used this preset in five cues. If you later decide to modify the cyclorama wash a bit, you just need to update one preset, instead of five cues. However, if you just want to change the color in one cue you can do that by overwriting the reference with manual data.


Picture 1: Presets
Picture 1: Presets


Recording Presets

To record a preset (i.e. record entries in programmer or parts of it) use the "Store Preset" Button in the preset window. The programmer filter will show. This gives you the ability to choose what to record. See Lesson 8 to learn how to use the programmer filter. After you press OK in the programmer filter, a new preset will be recorded. You can now use F2 (or click into name field) to rename it.

Modifying Presets

If you want to modify an existing preset, select the preset you want to modify and click on the arrow to the right of the "Add Preset" button. A menu will pop up, where you can choose how to modify the preset.

Replace

Replace will remove all existing entries from the preset and save everything that is in the programmer to the preset.

Merge

Entries that are not in the programmer but in the preset, are not touched. Existing entries will be updated and missing ones will be added

Append

Entries that are in the programmer, but not in the preset, will be appended to the preset. Entries that are in the programmer, and in the preset, will stay untouched in the preset.

Subtract

Entries that are in the programmer, and also exist in the preset, will be removed from the preset. However keep in mind, the new value is not subtracted from the old, but rather, the whole property will be removed from the preset.

Deleting Presets

Select the preset you want to delete, then press Delete or use the context menu, -> Delete Preset.

Applying Presets

You can "drag&drop" a preset into your cue list. A new cue is created. You can set timing and triggers for this cue. The name will start with "--> ". However, you can rename it to what you want. The complete preset will be played back when you use this cue.

Applying Presets for Selected Fixtures Only

Select the fixtures you want to apply your preset to. Then double-click on the preset you want to use. The entry will show up in the Programmer window. Keep in mind, if you store this to a cue, it is not the actual values that are stored, but a reference to this preset. So if you change something in your preset, the changed values will be used everywhere that you used this preset.

Applying Selected Properties of Presets

It is also possible to use only a selected property from the preset, and not the whole preset. Select all fixtures and drag&drop the preset to the property you want use in property grid. The values for the property will show up in the programmer

Applying Selected Parameters of Presets for Selected Fixtures Only

You can also apply only a selected property of your preset to selected fixtures only. First select your fixtures, then drag&drop the preset to the properties you want to use in the property grid. The value for the selected property of the selected fixtures will show up in the programmer window

Applying a Preset for Fixtures that are Not in the Preset

Also you can use a Preset to set a property of a fixture that has no value stored in the preset to a value from the preset. First a short example: A preset with some RGB Par-cans are set to a color. Later you want your moving lights change to the same color as your RGB Par-cans. You might do this by remembering, or looking up this color. But, there is a third possibility. Select your fixtures, in this example you moving lights, and move your preset (drag&drop) to the property grid. Now hold "Ctrl" key down and drop your preset to the color property of your fixture. The color of your fixture will be set to the last found value of the used property in your preset. I.e., the filtering of devices is switched off by the "Ctrl" key.

Shortcuts

Of course there are shortcuts that help to increase save time working with presets. But if you use shortcuts, the programmer filter will not be used.

Tips

Tip 1: By activating the "highlight" button the selected preset is shown in the live view.

Tip 2: By applying fanning in a preset you can use it for smaller or larger device groups with amazing effects.

Exercises

1) Create a preset "yellow" and use it per drag&drop in Stage View
2) Use some presets in your cue list

Arrow back.png Lesson 12
Lesson 14 Arrow forw.png
table of content
Retrieved from "https://wiki-en.dmxcontrol-projects.org/index.php?title=Lesson_13_Tut3&oldid=2478"